Description
Concept
The SecondSkin is a shibari-inspired full chastity belt with a focus on comfort for everyday wear. Its unique flexible cable system makes the belt perfectly follow your anatomical lines, giving a tight and secure feeling, while not hindering your everyday movements. At the same time, the parallel wires distribute the pressure evenly to a wide area to avoid pressure points. With long-time wearing in mind, the SecondSkin puts special attention to hygiene: the parallel wires of the belt allow air circulation to reduce sweating. The split crotch cable options leave the anus free for normal toilet usage (but you can still add your favorite toys).
Whether you wear the SecondSkin around your waist or hip, once locked on, you will simply feel the restriction of unforgiving metal encasing your most intimate part. Enjoy the bondage and frustration.
Which style is the best?
PLEASE READ THE DETAILED EXPLANATION ABOUT THE STYLES IN THE MAIN SECTION.
The SecondSkin chastity belt is available in 4 different styles: 2 different belt heights (hip/waist) and 2 different crotch cable styles (jockstrap/thong).
Hip: Wearing the belt around the hip gives you the most freedom of movement because movement of your upper body mainly involves your torso above the hips. Think of this height as where you wear a normal belt, which most likely you don’t feel in most movements.
Waist: You will feel the belt more when you wear it around your waist. Not only is more movement happening in the torso than the hip, but you will likely feel a bit of a corset effect, which of course can be a desired and nice feeling.
Jockstrap: The crotch cables are split at the perineum right after the cage. This means that the anus is completely free and you can do toilet nr. 2 normally, and the cables are away from the coccyx. They are then pulled over the cheeks where they join the main belt a bit to the side, not interfering with the sacrum. You won’t feel the cables while sitting.
Thong: The cables are kept together, guided through the cheeks over the anus and coccyx, and split right before the sacrum to not put pressure on this bony part. This style results in a different feel and look leaving the cheeks free. For toilet nr. 2, you can just pull the cables a bit to the side.
Our recommendation is the hip/jockstrap combination for the best movement and hygiene, but we are of course happy with the style you choose.
Tailored to you
The length of the belt is cut to your measurements. There are a series of belt holes that let’s you adjust the circumference of the belt for days where you just need a bit more or less slack. The anatomically shaped vulva shield is 3D printed to your specific body measurements to ensure a snug fit. The shield has cable length adjustment points on both ends, so you can independently lengthen or shorten the crotch cable above and below the shield for a perfect position.
Materials, built to last
The cables are encased in certified medical-grade silicone. Note that silicone may not be compatible with other materials (e.g. silicone oil). If you prefer another material to encase the cables, please contact kink-knack.
All metal parts are out of corrosion resistant and skin friendly stainless steel 316L. The lock is zinc/nickel.
Stealth mode
The SecondSkin is made to be worn tightly around the hip/waist with a snug fit around the crotch. With the ultraflat locking system, the belt truly is invisible under normal clothing!
Accessories
Get a pair of hangers for your belt to lock your favorite toys to it. Use them to lock on thigh bands, handcuffs, or simply as fixation points.
Technical specs
Chastity shield: 3D-printed in stainless steel 316L, polished inside and outside
Flexible shibari-style belt: stainless steel wires covered with medical-grade silicone, 30 mm wide
Adjustments: belt adjustable with belt holes, crotch length adjustable through cable attachments in shield
Lock: push-pin cylinder lock with keyless closing, zinc/nickel
Discretion guarantee
Kink-knack belts are shipped discreetly in plain packaging. We mark our product as ‘custom steel fabrication’ for international customs declaration.
How to measure
Circumference
To measure the belt length, wrap a flexible tape around your lower torso where you would like to wear the belt. Make sure that the tape is snug around the body but does not cut into it. Read the measurement (top: hip 79 cm, bottom: waist 71.5 cm).
Crotch length
For the crotch length, put a belt around your body where you want to wear the chastity belt. Depending on your preferred style, put the flexible tape either to one side over the ass cheek (jockstrap) or in the middle between the cheeks (thong). Take the tape through your crotch up to the belt. Measure from the underside of the belt in the back to the underside in the front (left: jockstrap 49.5 cm, right: thong 45 cm).
Shield
Coming soon.
Unsure about the cage measurements?
We offer a service to 3D-print your shield in plastic before producing it in metal! The plastic model is not meant to be worn as a chastity belt, but is sturdy enough to be put on so you can check the dimensions. You may even use a belt and some string to simulate how the shield feels when held in place as in the real belt.
FAQs
Can the chastity belt be adjusted? Yes. Beltholes allow the belt to be adjusted by 5 cm. While this may not seem a lot, keep in mind that the belt should fit snug around your body, and +- 1 cm actually makes a big difference. The crotch cables can also be adjusted by several centimeters.
What about toilet? It is highly recommended to use e.g. a plastic syringe to push water through the shield for cleaning after toilet. For number 2, with the jockstrap design the anus is kept free, and with the thong design, simply pull the cables a bit to the side.
Can it get wet? Of course. The main materials are corrosion-resistant stainless steel 316L and medical-grade silicone, made for 24/7 wear.
Is it visible under my clothes? No, the SecondSkin is completely invisible.